Snap Walls - Door, Portcullis, Arch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three modified versions of Axel Sandoval's award-winning Snap Walls to let you add various doorways to your setup.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 1036
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Share Alike
Three different ways to get through the walls you built out of Axel's Snap Walls - a closed door, a barred portcullis, and a simple open arch. I tried to optimize for .2mm print height, but the details are so tiny that they will benefit from a bit of paint.
Be sure to sand down the “pin” end before you try to attach them together so it slides in easily. The thinner middle of these designs, especially the open arch, makes them weaker, so if you have to struggle to get them separated, you will likely break the piece.