Plug Mount for The 100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the plug from the Ender 3 v2 power supply to the rear of The 100
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm trying to repurpose as many parts from my Ender 3 V2 to build The 100. One of the parts is the power supply. I created this plug mount to mount the stock plug that comes with the Ender 3 V2 to the back of the printer by modifying one of the existing connector pieces. All you have to do is reprint that piece and its a drop in replacement.
As you can see in the picture, I have just hot glued a switch to the side of the connector. The plug itself screws into the part using 2 short M3 screws. The holes in this design are 3mm in diameter and are self threading.