Hinge 4mm for acrylic doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these door hinges for my 3D-printer box. It's for 4mm thick acrylic doors. You dont need anything, beside…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these door hinges for my 3D-printer box. It's for 4mm thick acrylic doors. You dont need anything, beside two metal screws to mount these anywhere.
Please look excactly, which door hinge you need, before printing. There are two versions which only varies in the thread. The head of the screw should be outside.
LeftUp_RightLow = left side upper corner and right side lower corner
LeftLow_RightUp = left side lower corner and right side upper corner
Do not tighten the printed screws too much!
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
Normal/High Quality
Infill:
15
Filament: Geeetech PETG random
Category: 3D Printer Accessories