1 / 4
Glass bed corner clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A corner glass bed clamp that can be tightened over time. More print volume then traditional methods.
- Ocena
- 4,833 / 5
- Polubienia
- 175
- Pobrania
- 831
- Wydruki
- 6
- Wyświetlenia
- 2834
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 14)Remiksy (0)Kolekcje (209)Powiązane
This model was designed for Ender 5 Pro but it should be working with glass beds lower than 8mm.
Printing:
no supports, >20% infill, PETG, no brim, 0.15 height
Material is key, I wouldn't recommend PLA, ABS and PETG will be best.
---
Updates:
- July 14, 2023: Printing with those clamps for a month now and I have no issues. I am mainly printing with PLA but did a couple of PETG prints as well and I see no deformations.
- August 5, 2023: Printing with PLA almost daily, still no deformations. Sometimes when I scrape the bed the clamps fly away because I do not over tighten them. Solution is to hold the opponent end of the bed when scraping. I might rework the screw because the grip can be improved.
- August 5, 2023: Included a tightening screw with better grip, yet to be tested.
Please leave a like if you find the model useful. Would love some feedback and see your prints as well.
If you have some concerns or you want some custom modification to fit your printer don't hesitate to leave a comment.