Battery lid/cover for Trust Verto WL mouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery cover for PC mouse Trust Verto WL.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 61
- Wydruki
- 2
- Wyświetlenia
- 330
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Cover for batteries in the Trust Verto WL mouse.
Optimized for printing without supports (the pegs have 20° slope, which worked pretty well in my case).
The final part fits pretty well. I'd say, even as well as the original part :D
Print settings
Printed using Prusa MK3S printer with 0.25 mm nozzle, no supports, 5 mm brim, 0.10 mm layer height, 3 perimeters, 5 top and bottom layers, 30 % infill. Material was Prusament PLA, color Galaxy Black.
To be closer to the original part, I used a textured Steel Sheet (see photos). To be even closer, one can use e.g. PLA or ABS Prusament Jet Black.
The brim was used to ensure better adhesion on the textured steel sheet (my previous print without the brim failed after several layers). When printed on a smooth surface, the brim may be omitted.