Bambu X1C Cover Lift Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted lifters that attached to the cover rather than the printer itself.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 278
- Wydruki
- 8
- Wyświetlenia
- 1768
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
There are plenty of risers out there that mount to the printer itself, and usually employ magnets to hold them in place. I wanted something that attached to the glass, so I designed these clips. They give you about a .25" gap all around the cover. The temperature rise with these clips is on par with removing the lid completely (I observed about 3-4C rise with no lid, about 3-5C using the clips - YMMV). PLA works fine, and no supports are required. The .3mf file includes 6 clips which is what I recommend to support the cover/AMS adequately and to keep the cover from moving around in either direction.