1 / 2
Cows In a Field at Night lit by the Moon
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use the COLOR STLs as a modifier on the PLATE STL to make a multicolor print.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer. It has 2 12x3 (12.25x2.8) negative cylinders and a pause gcode to insert magnets.
You will have to scale the moon files down if you don't use the 3mf. I deleted the navy sky STL and added circles to make the halo effect, too. I messed up and used a lighter color behind the sparkly blue, which made it lighter than the blue on the inner circles.