1 / 2
Slabiimov Shroud — zdjęcie 1
1 / 2

Slabiimov Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cosmetic Shroud for the SLAB

Ocena
4,75 / 5
Polubienia
59
Pobrania
283
Wydruki
4
Wyświetlenia
2018
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print with 10 or 15% infill or else it will be quite heavy. 

The core needs to be printed with the tip facing up and with supports to build plate only.

 

Hardware:

10x M3 12mm screws

 

Assembly:

  1. Remove support material from the Core.
  2. Slide the Core over the modified Muzzle A piece.
  3. Make sure the holes align and Screw in 4 M3 screws on either side.
  4. Slide on the Inserts with the order provided.
  5. Slide on the Tip and use the last 2 screws to secure it in place.

Enjoy!

Tagi