Universal Frame Mount for 2040 aluminum extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix clamp-style mount designed to attach to the Prusa MK3s bear upgrade or any 2040 extrusion frame.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 240
- Wydruki
- 1
- Wyświetlenia
- 1887
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix clamp-style mount designed to attach to the Prusa MK3s bear upgrade or any 2040 extrusion frame. It tightens with a screw and can be positioned anywhere. It provides two mounting holes on the top, two on the bottom, and four on the back, with slots to insert square M3 nuts for each hole.
The mount does not interfere with the moving parts of the printer and can use with the original m10 adapter:
https://www.prusaprinters.org/prints/40947-angled-double-p4-m10-adapter-for-mk3s-frame-for-re
The mount prints with no supports. You will need a square M3 nut, and a 30 mm M3 screw.
Print instructions
I printed this in PETG with a 0.2mm layer height.
35% fill density, 4 Perimeters.
No supports required.