WhamCaster- Mini Clone Hero/ Guitar Hero controller with whammy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New body for the Modcaster mini Guitar/Clone Hero controller system. The neck files are located on my printables page!
- Ocena
- 4,667 / 5
- Polubienia
- 78
- Pobrania
- 388
- Wydruki
- 7
- Wyświetlenia
- 4746
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Model is only the body!
It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page!
At this time, some parts from @GermanDarkness's Clone Hero controller are required. I am in the process of designing a new strum bar for the ModCaster system and new face buttons, but his parts will fit and work until then.
____________________
Parts List with links to similar parts:
- 1x Arduino Pro Micro
- 2x MX cherry-style switches (whatever color you like)
- 2x Box Navy Switches for strum
- Tilt switch (mercury or steel ball)
- DB9 Connector
- 1x Strummer from GermanDarkness's build
- 2x Body buttons from GermanDarkness's build
- x9 m3 bolts (I usually use 20mm, but whatever works for you)
- x2 m3 bolts and nuts for strum bar (20mm should also work here)
- x7 heat-set threaded inserts m3
_____________________
Build video for the ModCaster Guitar with parts list and instructions
For the whammy bar, I bent a piece of 1/8 inch stainless steel bar and tapped threads on the end to mount on the whammy assembly. For the whammy input, I used a 10k Potentiometer wired to the VCC, GND, and analog input on the ProMicro board. 
Please share any builds!