Farkle Dice Board

This is a farkle board I drew up for my neighbor's birthday since we all love playing it together, and I couldn't find anything like this on the internet to print. 

It's meant to be portable and playable anywhere. There are 2 “Store ‘em” bins for sets of 6ea Standard 16mm D6 dice that will be just below flush to put the top on. And then 2 “Score ’em” bins that are raised so you have somewhere to put your scored dice off of the main rolling surface. They are plenty deep enough to hold the dice steady when rolling the rest of your hand, but also easy to grab them out when you're “and rolling”

The generic base files I uploaded just remove the “Stout Farms” Text from the base in pictures, considering I doubt there are many of those around.

.Step and .F3d fusion files are also uploaded for your editing pleasure, I apologize in advance for some of the mess I made in fusion, I'm still quite the beginner and was having a hell of a time getting nice fillets around the “score 'em” and “store em” bins.

Base was printed in Stronghero Red/ Green/ Blue Tricolor silk PLA filament. Text is Bambu Green PLA. Top is e-SUN pla+ Peak Green and Text is Bambu Black PLA.

For print settings:

Printed on X1C 0.20 Standard settings, .4mm nozzle. used 3 bottom layers, concentric surface pattern. 4 Top layers, with hilbert curve surface pattern for the textured effect. 15% honeycomb infill printed on textured PEI sheet at 60C. No brim required. 

Printed on X1C 0.20 Standard settings, .4mm nozzle. Top used 3 bottom layers with monotonic surface pattern, 3 top layers with concentric surface pattern. 10% honeycomb infill printed on AliExpress PEO sheet at 60C. No brims required.

FYI: All text is .6mm deep, so on my settings and printer, that would be 3 layers deep which is enough to hide any colors below. You may need to adjust as required.