Liczymy pasujące modele…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Replacement connector for Renault Laguna 3 Xenon light sensor. This part was broken on my car and I decided to replace it. After replacing the part you need to get the light adjusted. I printed the part in resin and it works flawlessly…
as always i included the STEP and f3d files so you can customize the back with your own logo. this is a battery/power bank add-on for your Pico 4 Head Strap. This add-on is compatible with the INIU Power Bank, 22.5W Fast Charging…
There is one already made on Cults3d but I made mine again from scratch because the other one is paid. This isnt the same model downloaded and reuploaded. This is original model. The walls might be too thin but from my testing it is few…
My home automation Raspberry Pi needed a UPS battery backup. I am using HomeSeer HS4-Pi. Found this Pi UPS on Amazon and it works great. Wanted a long lasting UPS solution. Existing power supply powers this UPS while providing power via 2…
Show off your wealth by unlocking shopping carts with this Euro coin. At 25.75mmØ, the recommended file to print is about as wide as a 2 euro coin, and at 2.4mm, about as tall as a 50 cents coin. Most European trolleys are set up to…
This a wall mount for the perversely bright Bosch GLI 18V-10000 C. This should also work for a Scangrip Nova 10 SPS, since the Bosch GLI is a derivate of that lamp. The holder has to be less wide for the 6k and 4k versions. Feel free to…
Keep the dust out of the ports on your Nitecore NB10000 while on your adventures. Also prevents accidental presses of the power button. Confirmed fits Gen 2, untested on Gen 3 Print Settings Material: TPU 95A Support: None
This is a battery adapter to attach an Anker PowerCore 10000 battery to the lower strap of the HTC Vive Deluxe Audio Strap. I have it attached to an Oculus Quest 2 via adapters. This adapter includes small slots for narrow zip-ties in…
Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder for the Solar Eclipse. The glass filter is a force-fit. However it is easy removal from the Seestar for totality.
This adapts your Anker PD 10000 battery to your Vive Deluxe Audio Strap (DAS). It is a simple snap on fit to the DAS occipital (lower) strap. I am using 1cm wide velcro to help retain the battery in the adapter. Top mount version here:…
Friction fit Anker PD 10000 holder for the Vive Deluxe Audio Strap. Built in break-away support. Solidworks Part file included. Occipital (lower) Strap mount here:…
GENERAL INFO Designed for 5x8x2.5 mm bearings, M2x18 and M2x30 bolts with nuts for mounting. For the shaft, it uses an M2x30 bolt, which makes the output shaft 15 mm long. The intake outer diameter is 6 mm wide and 15 mm in length. 44mm…
It's a simple cover to help prevent the dreaded NB10000 accidental long button press that disables the battery. Easy quick TPU print.
Estuche para power bank ADATA de 10.000mAh, impreso en filamento flexible TPU para protección de golpes y rayones. Especificaciones: Para imprimir en material flexible TPU se recomienda manejar una velocidad de impresión de 35mm/s,…
Front clip of Xiaomi powerbank 10000mAh (or any china clone).
Holds powercore 10000PD (A1235), may work for other 10000mAh models. The opening is 115mm x 26mm with a rounded bottom.
SunSun CPF-10000 Druckteichfilter
Holder for UGREEN Powerbank 10000mAh Power Delivery 18W USB C Power bank Print with TPU ~ 98 Shore A Edit: added a minimal version for maximised comfort, its fixed with zip ties so not clip on like the bigger version. Edit 2 the powerbank…
Note I not use stock resistor. I change turbine resistor to resistor like on photo. Recommended use turbine with adjust speed, or power supply with voltage adjust, because if you use hose from cable channel can generated very high noise!…
A Simple powerbank holder for the oculus quest 2 ^^ (TOPK Power Bank 10000mah) strap diameter for threading is: W: 25,00mm H: 2,50mm i use this one: https://www.amazon.de/gp/product/B08PYVY85Y You need: -TOPK Power Bank 10000mah -Velcro…
I have printed these with flexible material. It protects the powerbank really well.
This holds an Anker PowerCore10000 power bank onto the collection of Elite Strap clones here for the Oculus Quest 2. I found other solutions for holding the power bank too hard to use. I didn't have any good rubber bands, and wasn't about…
An adjusted holder for the PowerCore 10000, for use with https://www.printables.com/model/788221-pico-4-powerbank-holder Could do with having the battery window moved up to the top, and power button bit removed. So the power button side…
Print in TPU. If they are too loose, use tape or glue.
Model If this battery holder worked for you, please share the strap model and some photos so that the rest of the community can benefit. Thanks! ES Si te funciona este soporte para baterías, por favor comparte el modelo de correa y unas…
Print this out of TPU or any other rubbery elastic material at a vertical orientation. Comes with cut outs for the light indicator and on/off button
Beschreibung Adapter für LED Strahler Pro One FL18V10000LMDC defekt. Die Haltebügel waren nach einem Sturz abgebrochen und mussten ersetz werden. Typ: https://pro-one.eu/product/fl18v10000lmdc/ Montage: Adapter ausgedruckt und mit Feile…
A holder for the Anker powercore 10000 Powerbank. It attaches with zipties to the babybay bed. Diameter 20mm.
This items will hold the Anker PowerCore 10000 (Model A1246). I have other models for different USB power banks in the works as well. Right now I also have this holder for the PowerCore Essentials 20k You will need two M2.5 Skadis T-Nuts…
The Magclip 10000(uses) is a simple easy to print and manufacture cable management system Designed to be printed in TPU and have a 2mm x 15mm magnet to be pressure fit in the bottom slot. (I did do one in PETG that still worked it was…
French: Les clip de mes cuvettes se sont cassées alors je les ai rapidement modélisé en laissant un peu plus d'espace que l'origine parce que le PLA est un peu moins flexible, la pièce marche nickel. j'ai mis 25% de remplissage pour…
TPU protective case for the NITECORE NB10000 Gen4: two versions, one with a MagSafe ring and one without. Printed using Siraya Tech FLEX TPU Air at 70A setting. 2 walls, 15% infill. Prints upright with no supports needed for both…
Case Orico charger 6 port QSL-6U (YC-PE05010000H)
Minimalistic note box. You can choose according to the required capacity.
Another battery holder for the DAS Vive headstrap. It will need support for one of the clips.
Remix of Zakoplex's NiteCore NB10000 Gen2 Accidental Button Press Protector, with modified button slot. Printed on an MK3S+, 0.4 nozzle, 0.2 quality. Sainsmart 95A TPU. Sized the model down to 98% to make it fit more snug.
Powerbank holder for the Nitecore NB10000 Gen 2 and 3. Print in PLA 0.4 Easy print, perfect size and very stable.
Da bei größeren Touren mit GPS/Puls Mitschnitt der Handyakku doch gerne mal schlapp machte, suchte ich nach einer praktischen Lösung für Scooter & Fahrrad. Ich fand nichts! Daher nun dieses Design, bei welchem mir ein Freund am Ende bei…
Remixed for supporting common 10000mAh powerbanks. Possible to use other powerbanks with a bit different dimensions. Recommended to glue parts together.
Powerbank holder for the Nitecore NB10000 Gen 2 and 3. Print in PLA 0.4 Easy print, perfect size and very stable.
GENERAL INFO Designed for 5x8x2.5 mm bearings, M2x18 and M2x30 bolts with nuts for mounting. For the shaft, it uses an M2x30 bolt, which makes the output shaft 15 mm long. The intake outer diameter is 6 mm wide and 15 mm in length. 44mm…
Print in TPU. If they are too loose, use tape or glue.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Anker PD 10000 Powerbank holder for Quest 2 elite strap. For counterweight and extended battery life. If there are comfort issues from the mounts please use some padding on the back of the strap Tested on Elite Battery strap. But it…
This is a holder for Anker PD 10000 for mounting it on the back of Oculus Quest strap allowing it to be used as a counterweight and giving you ability to extend your play time. It was made to be easily detachable so that you could fit…
One of my nodes needed a far bigger battery. But the HT Slim Case Pro only suits a 3000 mAh battery. So after come cutting, slicing, copy-paste I got to this version that can happily hold a 10000 mAh battery from Makerfocus.
A external powerbank holder for any cage/camera! I created this because my Sony a6300 really bad battery life. With this i have a LOT more recording time, better temps and better top grip! Needed parts: Adata AP10000QCD power bank, is…
Gridfinity holder for 1 Anker A1259 powerbank. Non stackable.
This is a 3D printable glue-fit enclosure for building a custom power bank using the IP5328P_V1.0 module and a 1260110 high-capacity 3.7V 10000mAh Li-Po battery . The design ensures a precise internal fit while offering a compact, sleek,…
With these models you can teach or help students in two different ways to understand addition, substraction or multiplication that will lead to column or vertical addition/substraction/multiplication. Box for addition First: (right side)…
This is a handcrafted copy of the Heltec MeshPocket (10,000 mAh battery version). All dimensions were taken directly from a real Heltec MeshPocket and measured as precisely as possible. Component placements, cutouts, mounting points, and…
Printed with 0.3mm layer Height link to the power bank: https://ro.hama.com/00201712/hama-colour-10-power-pack-10000-mah-2-outputs-usb-c-usb-a-plum
Remixed for supporting common 10000mAh powerbanks. Possible to use other powerbanks with a bit different dimensions. Recommended to glue parts together.
This modification allows you to charge your Garmin Venu 2 or Venu 3S smartwatch using a modified wireless charger power bank. The project involves modifying the foldable Apple Watch wireless charger base, of a VRURC T1156 Qi power bank…
I remixed these so that you can sit the headset down and the battery mount does not pop off. This fits the Oculus Quest with Vive Deluxe Audio Strap and Anker 10000 PD+ battery. Mine are based on the 25 x 50 mounting clips from Jorg. I…
This is an Holder for a Powebank. I designed this to be used with the LucidVR Gloves. There are 2,5mm holes in the model in which M3 Threads can be cut.
Printed with PETG Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: Mobile Phone
Xiaomi Mi Powerbank 2 (10000mAh) to GoPro mount. I made it for my longer bike rides. Glueless compression fit, easy to remove. ABS or NYLON recommended.
TRONIC (10000mAh) to GoPro mount. I made it for my longer bike rides. Glueless compression fit, easy to remove. ABS or NYLON recommended.
Simple holder when you want to leave your solar powerbank on the windowsill so it can drink the sunlight
Car holder for Oukitel K10000 Pro monster battery smart phone. Print instructions Unassociated tags: K10000 pro Category: Mobile Phone Summary Car holder for Oukitel K10000 Pro monster battery smart phone. Print Settings Printer: Flux…
Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
Just a Power Bank Holder for Mi 10000 mAh battery capacity Aluminum exterior one.
10000 scale size of the caterpillar smoking a blunt meme that I expect absolutely nobody to make
THIS IS A WORK IN PROGRESS - PRINT AT YOUR OWN RISK This is a base which should fit an Anker PowerCore II 10000 USB power bank, for use with the TS-80 iron. All other parts for this can be found on the original model here:…
This is an upright holder for the Intenso S10000 Powerbank which isn't produced anymore. This holder has generous tolerances but still holds.
