Watchy Case with low-profile buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of a minimal thickness case with low-profile buttons for the Watchy dev kit from SQFMI.
- Ocena
- 3 / 5
- Polubienia
- 21
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 1056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Slim case with low profile buttons for the Watchy dev board from SQFMI.
Printed in PLA on a Prusa Mk2.5 at 0.1mm height.
For durability, the buttons were printed on their side, ie. with the center axis of the cylindrical part at one end perpendicular to the print bed.
Top and Bottom can be printed top down and bottom down respectively, and can even be printed without supports if your printer's bridging is good. I added manual supports to the strap recesses to get a better fit there.
Screws were designed for this one from McMaster because it's what I had on hand. M2 x 6mm thread forming screw with Torx head, because it's what I had on hand.