Battery tray for Dlux 2.2 rock crawler rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery tray that's suspended by the cross bars. The sizing is specifically for a GensAce 850mAh 3S battery.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Battery tray that's suspended by the cross bars. The sizing is specifically for a GensAce 850mAh 3S battery. Allows battery to be slid across the cross members to get good L/R weight distribution. I know some of you purists would prefer putting the battery on the front axle but I've measured the difference in weight distribution. In my rig that only gets 1% more weight on the front axle - I reckon that's small enough to consider a rounding error :). Also I prefer to tuck the battery in a bit more out if harms way.
Printed on a prusa - I printed with supports but I reckon you could probably get away without
Anyhoo - it works great for me - hope it will for you too.