1 / 1
Sovol SV06 Extruder Wheel - Crank Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speed up manual filament feed on the Sovol SV06 extruder with an old style hand crank
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 753
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (43)Powiązane
Purging the previous filament from the extruder it can be bit slow with the wheel, so here's an old style hand crank that speeds it up.
You need an M3 x 35mm bolt for the handle axle.
Tighten the bolt just enough so the handle doesn't rattle when printing.
No supports, print in PETG or ABS if you're printers in an enclosure.
Quick demo on YouTube…