Hanging bottlerack - designed fo Sodastream DUO (~100mm width bottles)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple but effective bottlerack to mount under your kitchen cabinet for ~100mm wide bottles. In my case, Sodastream DUO
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
helps a lot in getting back that oh so valuable counterspace, whilst having the bottles nicly accessable.
holes are ~4mm wide and widened at the beginning to sink in the screws (~8,5mm)
(i used M4x16 SPAX countersunk woodscrews)
it's made for two bottles (obviously)
The model is split into two pieces for mounting and easiey printing and connected with a dovetail (0.03mm clearance)
I used the following settings:
Raft: no
Support: no
wall loops: 4
Infill pattern: triangles
Infill density: 20%
oh, it's the thing on the left in the picture, if that wasn't clear.
//If for some reason your slicer doesn't support .step files or you just simply want the stl //anyways, just hit me up and i'll export it as a .stl file