Hanging bottlerack - designed fo Sodastream DUO (~100mm width bottles)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple but effective bottlerack to mount under your kitchen cabinet for ~100mm wide bottles. In my case, Sodastream DUO
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
helps a lot in getting back that oh so valuable counterspace, whilst having the bottles nicly accessable.
holes are ~4mm wide and widened at the beginning to sink in the screws (~8,5mm)
(i used M4x16 SPAX countersunk woodscrews)
it's made for two bottles (obviously)
The model is split into two pieces for mounting and easiey printing and connected with a dovetail (0.03mm clearance)
I used the following settings:
Raft: no
Support: no
wall loops: 4
Infill pattern: triangles
Infill density: 20%
oh, it's the thing on the left in the picture, if that wasn't clear.
//If for some reason your slicer doesn't support .step files or you just simply want the stl //anyways, just hit me up and i'll export it as a .stl file
