1 / 4
Blink Camera Mount for Print Monitoring — zdjęcie 1
1 / 4

Blink Camera Mount for Print Monitoring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had an old blink camera that I wasn't using for much and decided it would work well as a monitoring camera for…

Ocena
0 / 5
Polubienia
7
Pobrania
31
Wydruki
0
Wyświetlenia
408
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I had an old blink camera that I wasn't using for much and decided it would work well as a monitoring camera for checking in on long prints while I'm not at home. There are a few mounts out there but I didn't want to have to screw it in for whatever reason. This one just uses a little hook mount to hook into the base of the mini's frame.

There's a straight-on version and an angled version, i think the angled one is my favorite as you can put it all the way at the end of the frame and it still gets a good picture.

Would likely also work for any printer that has the same frame.

I got the idea to use the hook from the holder from the mini spool holder design here: https://www.printables.com/model/179551-prusa-mini-spool-holder

I got the actual mini camera mount from this jperez's STL, found here... thank you!! :https://www.thingiverse.com/thing:2851232

Print Settings

Printer:

OG Prusa Mini

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

20-25% gyroid, 100% any other

Filament:

Sunlu PLA Matte

Grey


Notes:

Can mess with the angle to your liking for printing and how you want supports... most important part to print correctly is the point that connects to the printer frame - should definitely use gyroid infill if you're not doing 100% infill as any other will likely leave weak spots in that area.

How I Designed This ===================

Thingiverse

I imported the STL from jperez into thingiverse and created the hook and whatnot for the attachment to the printer.

Category: 3D Printer Accessories

Tagi