1 / 2
Robot Vacuum Garage Doors Arm for Aqara Roller Shade driver E1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've designed an arm to be used with Aqara Roller Shade driver E1 for a Robot Vacuum Garage Doors project for my…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 3429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (30)Powiązane
I've designed an arm to be used with Aqara Roller Shade driver E1 for a Robot Vacuum Garage Doors project for my friend.
The project details are well described here: https://www.reddit.com/r/homeautomation/comments/145yvep/simplest_implementation_of_robot_vacuum_garage
Print Settings
Supports:
No
Resolution:
0.2
Infill:
30%
Filament:
Any PLA
Notes:
I've used 6 perimeters to maximize strength, which is probably an overkill