Sylph 4020 blower hotend/heatbreak remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the hotend cooling on the SylphV3 to fit a 4020 blower fan. Just felt like it needed the versatility,
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model followers the same parameters for assembly as the original 5015 shroud assembly, but for a 4020 Blower fan size. The only major hardware change is that you will need 3 longer m3 bolts to compensate for the wider fan body. I had an assortment of bolts lying around so Im not 100% on the bolt sizing but I think this is an M3x22mm bolt that I used. (please comment if that's incorrect) outside of that the parts list is the same
The fans I use and modeled this after can be found and purchased here : https://www.amazon.com/WINSINN-40x20mm-Brushless-Cooling-Extruder/dp/B07L2YH79Y/ref=sr_1_3?crid=1KMWNGV0OM65G&keywords=4020%2Bblower%2Bfan%2B24v&qid=1686483417&sprefix=4020%2Caps%2C124&sr=8-3&th=1
This model is still new so feel free to add any input you feel necessary I love constructive criticism as I am still an amateur modeler at best.
UPDATE Looks like I forgot to make a new “wire holding bracket” to fit so that will be coming soon.
Thank you and hope you enjoy!!!