Camvac Filter Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a modern filter on the Camvac dust collectors, to replace the traditional cardboard and cloth filter system.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 1817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Use modern harmonica style filters on your Camvac dust collector.
I used these filters: https://www.destofzuigerzak.nl/filters/9039800em:ketelfilter-131cm-x-148cm-eigen-merk
Part nr.: 9039800em
Original part nr.: 9039800 (this appears to be the same part, though I have only tested the one from the link above)
EDIT: This filter is not always available. You can use the .f3d file to change the dimensions to fit a similar filter. Be careful not to get a filter that is too large, since they will not fit next to each other.
The dimensions of the current filter are:
- Internal diameter: 105mm
- External diameter: 131mm
- Length: 148mm
Printed using Sovol SV06 Plus using PLA
0.4 Nozzle
0.2 Layer height
No supports
Are you unable to print this, or unable to source the filter? Send me a message and I'll try to help you out :)