Planetside New Conglamerate Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another in my series of game logo magnets. You'll need a 20x2mm magnet for the hole. Would look cooler if I could…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just another in my series of game logo magnets. You'll need a 20x2mm magnet for the hole.
Would look cooler if I could have done a color swap for something darker on the first 1.6mm to really make the feathers pop, but I didn't have anything appropriate. I also didn't have any blue, so the inlay is just white PLA and blue sharpie.
Print Settings
Printer: Ender 3
Supports: Yes
Resolution: .2
Filament: Hatchbox PLA Silk Gold, Pure White
Notes:
The blue piece might be a touch tight. I updated the STL to give it a bit more clearance in the ring after my first print but haven't tried it again yet. I had to shave a little off with an xacto to get it to fit. Dry fit it before putting any glue down to make sure!
How I Designed This
The Planetside 2 logo is boring, and I really only ever played NC anyways. I couldn't find this anywhere so I took a PNG from reddit or somewhere of the NC logo and made it an SVG in photoshop, then used that to rebuild the outline in Tinkercad. I did the rest with primatives.