Parrot Teleprompter Lens Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better support for padcaster parrot teleprompter that won't break your lens
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the Parrot portable teleprompter, but the few times I tried using it mounted on Canon EF-m 22mm lens, the lens motors were not happy focusing with all the extra weight. So, I had this thing sitting in storage until I decided to make some rings. Inspired by some of the coldshoe lens adapters that people have uploaded, I decided to do the same for the teleprompter.
These adapters have much better weight distribution, and it doesn't feel like the lens motors will break, but each lens diamater requires a custom adapter
They use a gopro style M5 Thumbscrew and with a nut lock part.
I have created adapters for the following lens/diameters:
- Canon EF-M 22mm lens (60.5mm dia)
- Canon EFS 24mm lens (69.2mm dia incl mf/a switch)
- Sigma EF-M 30mm lens (66mm dia)
- Canon G7x Mark III portable camera (58.1mm dia)
I've printed these with PLA 0.6mm nozzle on Prusa Mini+ the the largest part flat with minimal painted supports in the gap used to adjust the tightening. I recommend printing with black filament to minimise see-through visibility of the adapters through the glass of the teleprompter.