1 / 3
Hydroponic Drain (IBC-Auslauf)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As my friend's water container did have a stop valve for letting out water and stopping it, but he did not have a good drain, so the water shot undisciplined out. This has come to an end now!
Took the closing lid, drilled a Ø26mm hole in it. Took a template from Thingiverse and changed this to my needs.
Made two drains with an angle of 80° and 65°. Drain and nut fit into the lid, an rubber O-ring helps sealing the system.
Works fine. Printed on V0.1 (ABS) and V2.4 (HIPS). Drain was printed with a bit of support.
Explore my other Printables: https://www.printables.com/de/@Tritschi