Hydroponic Drain (IBC-Auslauf)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My friend needed a drain for his IBC container. The container had a stop valve but no real drain. Now he has a drain!
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 206
- Makes
- 0
- Views
- 1,671
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As my friend's water container did have a stop valve for letting out water and stopping it, but he did not have a good drain, so the water shot undisciplined out. This has come to an end now!
Took the closing lid, drilled a Ø26mm hole in it. Took a template from Thingiverse and changed this to my needs.
Made two drains with an angle of 80° and 65°. Drain and nut fit into the lid, an rubber O-ring helps sealing the system.
Works fine. Printed on V0.1 (ABS) and V2.4 (HIPS). Drain was printed with a bit of support.
Explore my other Printables: https://www.printables.com/de/@Tritschi