1 / 6
Pitzer College / Orange Slice Hanging Party Decoration
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging double-sided decoration for a graduation party for a student accepted to Pitzer College in Claremont, CA.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom designed party decoration for a student attending Pitzer College in the Fall of 2023.
This design uses the thin layer over-print to embed color into the flat surface of a print. It also uses a layer-based filament change to print the Pitzer College Tree Logo as a debossed shape.
Instructions
- Print the file “Pitzer-Puck-Back-Pith.stl” first on your build plate. This is a total of 0.3mm in height. Do not remove this print from the build plate when complete. Remove any brim or pre-print purge lines from the build plate. It should be entirely clear, except for the shape itself.
- Print the file “Pitzer-Puck-Front-Puck-ColorChange.stl” directly on top of the print in step #1. This print will create a skirt, envelop the previous print, and embed it into the bottom. (See the 2nd photo). In order to get the tree logo, set up a layer-based filament change at the first layer where the tree logo starts. (See photo 3 and 4)
That's it!
Please post your makes, and if you have any questions… ask!