1 / 1
Land Rover Series 302373 Rubber Washer — zdjęcie 1

Land Rover Series 302373 Rubber Washer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The rubber washers for the roof often deteriorate and replacements can be quite expensive. So you can print your own 🥳

Ocena
0 / 5
Polubienia
8
Pobrania
37
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

General

This is a replacement for the rubber washer for the Land Rover Series roof (part number 302373). Commercial replacements are available but as you need 14 for the 109 wheelbase, printing can be cheaper.

The center hole fits an M6 screw as well as the original imperial screw.

 

Versions

“Normal” - Just a plain washer.

“Medium” - A small lip (0.6mm) added to the washer, helping with centering the 6mm diameter screw inside of the 7.5mm hole of the spacer.

"Long" - A larger lip (1.6mm), helping even more with assembly.

 

Print Settings

  • Use TPU or other flexible filament
  • Infill depending on TPU hardness, 100% is okay for most types

 

Please consider liking and posting a make if you find this useful 🙂

Tagi