Mitsubishi Outlander 4WD Knob Bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed for my 2010 model but it will most likely fit other models High-res detailed model added for resin.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My knob bezel cracked so I thought I may as well design and print a new one.
I used snug supports which seemed to work the best.
I also recommend using ironing on all top layers for a smother finish.
There are 2 models, Outlander4WD is the original and designed to the exact same size as the original but I made Outlander4WD2 to thicked up the top section so it prints and looks better, I recommend using the second one.
This one is currently printed in eSun PLA+ to test how well it holds up in the heat of the car.
So far it's held up perfectly in the tropical sun, I have since printed a new one in resin.