Pinning Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mix of tools to make re-pinning locks easier
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 331
- Wydruki
- 5
- Wyświetlenia
- 2340
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A mix of tools to make re-pinning locks easier
Print instructions
Note: If you only want 1 of the plug holders, you should use the medium plug holder because it fits the most amount of locks.
Note: The pinning tray is more useful than the parts tray due to the fact that it can hold pins without letting them get mixed up or rolling around.
This is a set of tools made for pulling apart and reassembling locks, it does not include plug followers but those can be made of things such as paper, cardboard, AA Batteries, etc. that are 10mm, 12.6mm & 14mm, with 12.6mm being the most popular.
Print Instructions:
Infill: 15%
Layer Height: Up To 0.30mm
Material: PLA or PETG