Sterilite Hygrometer Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows Hygrometer to hang on inside lip of 32qt Sterilite box. May work with other box sizes.
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 98
- Wydruki
- 3
- Wyświetlenia
- 824
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of two different models. I wanted to be able to hang my hygrometer without putting any holes in the Sterilite box.
I used the spacer_end model from the Modular Dry Box Dispenser, flipped it and connected it to the Drybox hygrometer mount model.
I altered the models by removing the screw holes from the hygrometer mount and made the spacer_end a little deeper to match the mount.
I printed this at .3 layer height with a .6 nozzle and it comes out just fine. A .2 height with a .4 nozzle would work too.
For my prints, I like to give it 3 walls and 3 top/bottom layers.
I also printed this with organic supports in PrusaSlicer for build plate support only.
Licensing Note: The models had different license types so I made this comply with the most restrictive of the two.