Sterilite Hygrometer Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows Hygrometer to hang on inside lip of 32qt Sterilite box. May work with other box sizes.
- Rating
- 4.5 / 5
- Likes
- 22
- Downloads
- 98
- Makes
- 3
- Views
- 824
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of two different models. I wanted to be able to hang my hygrometer without putting any holes in the Sterilite box.
I used the spacer_end model from the Modular Dry Box Dispenser, flipped it and connected it to the Drybox hygrometer mount model.
I altered the models by removing the screw holes from the hygrometer mount and made the spacer_end a little deeper to match the mount.
I printed this at .3 layer height with a .6 nozzle and it comes out just fine. A .2 height with a .4 nozzle would work too.
For my prints, I like to give it 3 walls and 3 top/bottom layers.
I also printed this with organic supports in PrusaSlicer for build plate support only.
Licensing Note: The models had different license types so I made this comply with the most restrictive of the two.