Kossel Z-probe mount with optical switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*UPDATED: 5/3/2015 Made it taller to add more space between the magnet and the wrench. TOO STRONG :-). Tapered the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
*UPDATED: 5/3/2015 Made it taller to add more space between the magnet and the wrench. TOO STRONG :-). Tapered the top.
I designed this to hold an optical switch to be used as Z-Probe for a Kossel mini. I used a strong magnet that I had laying around from a hard drive I disassembled long time ago. The allen wrench is modified too, just a little shorter on the front so it doesn't interfere with the fitting. I got this optical switches on ebay:
http://www.ebay.com/itm/390986451783?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The cones can be removed using small pliers or wire cutters and will open the holes for the fasteners.
Instructions
Printed using repetier host and repetier firmware. Sliced using CuraEngine 0.2 layer and 20% infill. No support or raft. Borosilicate glass bed and Elmer's washable glue.
Category: 3D Printer Parts