Textured Paint Roller Attatchment for Use in Ceramic Modeling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach the tubes to a paint-roller, and when rolled on (unhardened) clay, it will make a textured background.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Lesson Plan and Activity: With a partner, you will design a “3D” ceramics tool using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.
Assembly/Construction Instructions Section: No assembly needed
Design Choices:
This is the image that my group decided to base our design for our tool on.
At first, I tried making a sine wave across a cylinder, but had difficulties fitting it around the cylinder.
Desired outcome:
The sine wave function would never touch the cylinder for some, unidentified reason
To resolve this issue, I resorted to making splines on a tangent plane in order to use the wrap command, and have the same result.
After this, I offset the sine wave 8 times in order to fill out the entire cylinder
A design choice that was made, was to make the waves somewhat far apart in order to maintain a fluid and wavy feel, rather than a sharp and rough one.
This is our final product:
