Textured Paint Roller Attatchment for Use in Ceramic Modeling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach the tubes to a paint-roller, and when rolled on (unhardened) clay, it will make a textured background.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 100
- Makes
- 0
- Views
- 753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Lesson Plan and Activity: With a partner, you will design a “3D” ceramics tool using Solidworks. You and your partner will have the same design which meets the constraints below, and you will EACH use Solidworks to create your design.
Assembly/Construction Instructions Section: No assembly needed
Design Choices:
This is the image that my group decided to base our design for our tool on.
At first, I tried making a sine wave across a cylinder, but had difficulties fitting it around the cylinder.
Desired outcome:
The sine wave function would never touch the cylinder for some, unidentified reason
To resolve this issue, I resorted to making splines on a tangent plane in order to use the wrap command, and have the same result.
After this, I offset the sine wave 8 times in order to fill out the entire cylinder
A design choice that was made, was to make the waves somewhat far apart in order to maintain a fluid and wavy feel, rather than a sharp and rough one.
This is our final product: