1 / 3
WAGO Box for the "Remix of RyanDam's Cable Management Duct for Voron Printers" v3.0 — zdjęcie 1
1 / 3

WAGO Box for the "Remix of RyanDam's Cable Management Duct for Voron Printers" v3.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a box which I am using to hold two 5 port WAGO connectors.  It is designed to be incorporated into the following cable management duct remix:

https://www.printables.com/model/502306-remix-of-ryandams-cable-management-duct-for-voron

Since these models are designed to work with electrical components (wires), if you use these models, it is at your own risk.  These models will not meet code requirements, so use your best judgement if they should be used in your application or not.  If unsure, consult an expert or professional (not me).  In general, I suggest using a flame retardant filament for any prints that will hold electronic components.  

I used two 221-415 WAGO's with this.  These are designed to be used with Brother P-Touch 12mm labels, but other labels would also work if they can be made to fit.  The frames slide over the labels to help hold them in place (glue may help secure the frames but I did not need it).

Note that these work with 2mm zip ties (they may also work with 2.5mm zip ties, however that is untested.

There are two lids included, one is plain (which I used) and the other has an insert label which says “5V DC” to indicate how I plan to use them (I am using them to break out some 5V DC connections).

Parts are not oriented for printing (BUT there is a Bambu Studio 3mf with all the models, which is set up for printing).  The 3mf should be compatible with Orca and PrusaSlicer.

In general, I suggest using a flame retardant filament for any prints that will hold electronic components, but use your best judgement on the appropriate material to use.  I used VHB tape to secure them, but just note that once placed, they won't likely be going anywhere soon.

The STEP file is included for easy remixing.  

OTHER STUFF:

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables or MakerWorld, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!

 

Changelog:

4/8/2025:  The base design is now updated to the v2.0 Rev 6B spec with thicker walls.  

4/9/2025:  The base design is now updated to the v3.0 Rev 1H spec with updated zip tie mounts.

4/13/2025:  Added some blank frames which will allow for printed text labels, using the slicer and text modifiers.  Thanks to Steiner-SE for the suggestion!  V3.0 Rev 1J

4/20/2025: Added new covers with 5v, 12v, 14v and a logo option.

 

Tagi