1 / 1
TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C — zdjęcie 1

TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Temperature Towers for each Filament

Ocena
4,667 / 5
Polubienia
23
Pobrania
601
Wydruki
3
Wyświetlenia
1696
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Public Domain

Here are some Temp Towers which you can easy use in the range which is needed in your case.

You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament.

The Temp Tower is designed for a 0.4mm nozzle at a layer height of 0.2mm

The Temperature should be changed at these layers:

  • 50
  • 100
  • 150
  • 200
  • 250
  • 300

check you material temperature. This should be set to the max amount which you want to print. Otherwise you can change your extrusion temperature at layer 5 which is directly after the base.

I will post some instruction in the nearby future

Tagi