1 / 1
TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C — image 1

TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Temperature Towers for each Filament

Rating
4.667 / 5
Likes
23
Downloads
599
Makes
3
Views
1,693
Reviews
3

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

Here are some Temp Towers which you can easy use in the range which is needed in your case.

You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament.

The Temp Tower is designed for a 0.4mm nozzle at a layer height of 0.2mm

The Temperature should be changed at these layers:

  • 50
  • 100
  • 150
  • 200
  • 250
  • 300

check you material temperature. This should be set to the max amount which you want to print. Otherwise you can change your extrusion temperature at layer 5 which is directly after the base.

I will post some instruction in the nearby future

Tags