1 / 2
Prusa Enclosure Spool-holder-R with arm shifted deeper — zdjęcie 1
1 / 2

Prusa Enclosure Spool-holder-R with arm shifted deeper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved Spool-holder-R for Original Prusa Enclosure that provides more clearance between the filament spool and door

Ocena
5 / 5
Polubienia
39
Pobrania
279
Wydruki
8
Wyświetlenia
1191
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

The problem

The original Spool-holder-R causes some filament spools to scratch against the door when the extruder pulls on the filament, causing visible scratch damage to the door.

When the air filtration fan is on, this intermittent contact also causes a bad rattle noise.

This fix

This part provides a quick fix by adding 25mm of additional clearance.

Printing

Same as the original instructions:

  • print settings: 0.20mm QUALITY
  • filament: PETG (tested on Prusament)
  • 15% grid infill

Installation

Drop-in replacement for the original Spool-holder-R: 4A > Step 37.

Comparison

Top: this model

Bottom: original

BeforeAfter

Tagi