1 / 2
Prusa Enclosure Spool-holder-R with arm shifted deeper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved Spool-holder-R for Original Prusa Enclosure that provides more clearance between the filament spool and door
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 279
- Makes
- 8
- Views
- 1,191
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0

The problem
The original Spool-holder-R causes some filament spools to scratch against the door when the extruder pulls on the filament, causing visible scratch damage to the door.
When the air filtration fan is on, this intermittent contact also causes a bad rattle noise.
This fix
This part provides a quick fix by adding 25mm of additional clearance.
Printing
Same as the original instructions:
- print settings: 0.20mm QUALITY
- filament: PETG (tested on Prusament)
- 15% grid infill
Installation
Drop-in replacement for the original Spool-holder-R: 4A > Step 37.
Comparison
![]() |
Top: this model Bottom: original |
| Before | After |
![]() | ![]() |


