MST RasPi Case Fan Grill Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
collection of Fan Grills for the Modular Snap Together Raspberry Case
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 144
- Wydruki
- 3
- Wyświetlenia
- 501
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
after printing the great Modular Snap Together Case by Sneaks for a Raspberry Pi 4 I wanted a grill to keep a little dust and fingers out of the fan.
It’s my own design and not a remix but for linking reasons I labeled it as one.
so this is the result of my trial, as you can tell I got carried away a little…
the 10+15+15+10 uploaded versions include an empty one for your own designs if you like the fit of the frame but none of the patterns. 0.9mm seems to be a good height for the patterns to be strong and flexible (when printed in PETG).
the patterns called „MST RasPi Case FanGrill_berry“, „MST RasPi Case FanGrill_berries“ „RasPi Case FanGrill_smallcircles“and „RasPi Case FanGrill_prusa“ and some others are quite dense and might reduce the airflow significantly, but should still do the trick with passive cooling - not testet. in general most of the designs individualize the case but are not performance efficient.
the whole grill is supposed to bend a little to the outside when pressing it into the opening, it’s a mixture of snapping in and spring-forces that keep it in place.
had good results printing in PETG at 0.1 layers with standard prusaslicer settings and it’s a 12-20 minutes print depending on the version.
test-printed only for the opening of the original part called „__raspi_module_1_01-SNAP-IN FAN.STL“ but since the opening diameter of the fan doesn’t change it should fit other versions too.
Thanks to the creators of the designs I used for this!
octopi logo by KORSiRO at thingiverse
raspberry logo by Lammesky at printables
Prusa logo by ToxicMaxi at printables
printables logo by C2Coder at printables
drop design by LinuTec at printables
open hardware logo by Maeshmaker at printables
green Update: 15 additional grill designs
purple Update: another 15 grill designs
red Update: the last 10 grill designs for now
Print Settings:
no brim
no supports
infill doesn’t matter
0.2 first layer is fine
0.1 layer height
3 parameters and 5 full layers top/bottom should lead to 100% infill
as always I highly appreciate every like, rating or make, same for remixing and sharing.
donations will be forwarded to sea-watch.org