1 / 7
Fragrance sample holder shaped as gas canister — zdjęcie 1
1 / 7

Fragrance sample holder shaped as gas canister

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A gas canister shaped fragrance/perfume/cologne holder

Ocena
0 / 5
Polubienia
16
Pobrania
73
Wydruki
0
Wyświetlenia
856
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You know those fragrance samples you get after buying a fragrance in store? This is a creative way to store them! It holds 10 11.1mm (Diameter) sized vials.

There is tolerance so if your calipers read 11.3mm for example it would still fit. If your not sure i added a 3d model for testing if it would fit labeled, “canister size test”.

When you are printing “pin1” print with the hexagon facing down, and add a pause on prusa slicer right before it builds a bridge over the hole in the pin. Then you would insert the part labeled “ring” into the pin carefully making sure to not slide the pin off the build plate.

I attached a gcode with this setup to show the pause. But you can also use it to print. 

Watch the gif attached that demonstrates the model.

Tagi