P
Printables
Marc Jacobs perfume travel cap
Travel cap for Marc Jacobs perfume bottle, as the original flower bottle cap tends to fall off when traveling. Print instructions Supports: None needed Infill: 15% 0,15mm Filament: PLA
Wyniki wyszukiwania: perfume
Liczymy pasujące modele…
P
Printables
Prefabricated stand for perfume samples
This stand consists of two parts, designed to accommodate 18 bottles up to 14mm in diameter. The size of the stand is 68x128mm. An additional layer of 0.2 mm is made on the top cover, for a beautiful smooth print on the surface of the…
P
Printables
Perfume Samples Travel Case
I have quite a lot of small perfume samples that I like to carry with me in a protective case, so I designed this case specifically to protect them. It is suitable for common perfume samples with volumes ranging from 1–2 ml. There are two…
P
Printables
Cologne/perfume shelf for V-day
cologne/perfume shelf for displaying collections. could be used for other stuff as well, customizable as far as adding wording to it if you would like! feedback appreciated!! 2 pcs, will need glued together, i wanted it fairly big.
P
Printables
4x6 Cologne/Perfume Sample Holder
Compact 4x6 holder for storing fragrance samples. Designed to supporting most common fragrance vials. Perfect for organizing cologne, perfume, or scent samples on your desk or shelf.
P
Printables
Perfume stand
This is just a simple perfume stand, make sure to double it in size otherwise bottles won't fit.
P
Printables
perfume gift box
The model is created in Onshape. Printed with PETG 2 perimeters and 15% infill.
P
Printables
Idole perfume bottle support
This is a support for the idole perfume of 50ml makes it harder for it to tip over
P
Printables
perfume shelf display
easy to print, no support needed I printed in PLA, 0.2 layer height, 15% infill and it was good each shelf is 5X15 cm
P
Printables
Trudon Perfume Top Insert
This is a replacement for the plastic insert for the top of a Trudon perfume bottle. It friction fits into the glass top, and onto the atomizer. It might be a bit tighter than the original even, which is a welcome change. Printed in PLA+,…
P
Printables
Perfume bottle stand (dodecagonal shape)
The stand in the image is printed with 10% infill and Fuzy skin: Contour At the bottom it has 4 cutouts for attaching self-adhesive silicone feet to prevent slipping.
P
Printables
10ml Perfume Sample Stand sem-modular
it may need glue if you want to go to the 2nd section.. but you can keep it with only one section, don't need anything to rotate. neither supports
P
Printables
Scentbird Perfume Stand
.15 layer height - variable layer height recommended No support/brim/raft required
P
Printables
Perfume sample stand for 14mm bottles
A few sample holders are found on here and other websites but nothing that allowed bottles with a diameter of 14mm. I decided to take inspiration from the designs but make it from scratch so I can later adjust it for different bottle…
P
Printables
Perfume Sample Holder for Ikea Mosslanda
It will fit all perfume tester with a diameter smaller than 11 mm. Its a left and right site to connect to each other so they'll stay together. Printed with PLA in 0.2mm LH. 15% Gyroid infill
P
Printables
perfume bottle
Its a rough copy of a chanel perfume bottle i thought looked nice. Its got threads and working screwcap.
P
Printables
Perfume Stand - 3 Tiers
Large display stand with 3 tiers. Printed in bronze Bambu PLA which make this look very elegant. Printed in 2 pieces since this is roughly 15"x10". I optimized the printing so it is still structurally sound and only requires about ~300g…
P
Printables
Perfume sample stopper
Small part to stop perfume samples from being compressed in your bag.
P
Printables
Airwick MyPerfume
I bought the house-perfume from “MyPerfume”. And i thought it would be nice to have it spray automatic. So i took my Airwick automatic sprayer, and made an adapter to use the large spraycan. Needed another nozzle so it would work. This is…
P
Printables
Armani Code Homme perfume organizer
Easy and fast printing design. Perfume bottles should fit in perfectly. Additionally made two holes for small perfume testers (diameter: 10mm). Printed with PLA.
P
Printables
Fancy Box for makeup, Jewelry, perfume.
Uses 6x3mm magnets glued in for door latching, found here: https://www.amazon.co.uk/gp/product/B07MT9P2K9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and hinges with M2x10mm screws, found here:…
P
Printables
Gridfinity Cologne or Perfume Sample Size Spray Tube Holder (1x1)
Holds 5 sample-size cologne or perfume tubes in a 1x1 gridfinity square. Included standard fit, loose, and tight that may be useful depending on your printer calibration and whether the tubes have labels or not. Shoutout to KptnAutismus…
P
Printables
Organizer of 5 small perfumes
The size of the containers is 2U x 2U (84 x 84 mm). Each hole is 23 x 23 mm.
P
Printables
Mid-sized perfume organizer
The size of the hole is 30 x 25 mm. It allows two perfumes to be contained.
P
Printables
Customized Chanel perfume organizer
It is specifically customized for Chanel perfume. The total size is 1U x 2U (42 x 84 mm).
P
Printables
Minimalist Perfume Samples Holder
Intro A minimalist holder for 20 perfume samples: 10x1.5ml and 10x2.0ml. Features a clean, Scandinavian-inspired design that keeps your fragrance collection neatly organized and easily accessible on a dresser, in a drawer or bathroom…
P
Printables
Bath & Body Works perfume cap replacement
Someone smashed the damn lid of my girlfriend's Bath & Body Works perfume cap but I have a device that makes plastic things so I made a plastic thing and it looks good thanks. Prints quick, half an hour or so. Use whatever filament and…
P
Printables
Sample perfume display
This was a request from a friend who collected sample perfume vials.
P
Printables
Marc Jacobs perfume travel cap
Travel cap for Marc Jacobs perfume bottle, as the original flower bottle cap tends to fall off when traveling. Print instructions Supports: None needed Infill: 15% 0,15mm Filament: PLA
P
Printables
Cologne / Perfume 1 ML Sample Holder
Designed to hold 1 ml samples with a hole size of 0.38 inches in diameter and a depth of 3/16 inches. Dimensions are 3 inches by 4 inches by 0.25 inches.
P
Printables
Perfume Tester Tube Travel Case
3D-Printed Travel Case for Perfume Testers This compact, two-part travel case is perfect for carrying perfume testers (55mm x 10mm) on short trips, eliminating the need to pack large, bulky perfume bottles. The case is designed with…
P
Printables
Perfume Sample Holder
It can hold up to 12 perfume samples that are ≈ 1 cm in diamater and ≈ 4.5 cm in height. I also made a halved version that can hold up to 6 if the normal versions too big.
P
Printables
Perfume sample holder
Simple but functional holder for perfume samples. Onshape if you want to modify: onshape . Print instructions Category: Containers Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10%
P
Printables
Perfume sample holder
The 3D project is a stand for perfume samples, designed to hold 50 samples in openings with a diameter of 12,5 mm or 32 samples of 15mm. It includes a dedicated space for a note to describe the collection or add information. The simple…
P
Printables
Perfume / cologne holder for closets .
Its really easy to print but u have to bare in mind that you only need supports for the bottom and infill above 15% . Keep the speeds and temps low for better results .I used fuzzy skin for this but you can save time with it off . PLA…
P
Printables
Honeycomb organizer for perfumes
Individual honeycombs can be connected with glue and attached to the wall with double-sided tape .
P
Printables
Arabic Attar bottle holder (perfume)
This is an attar bottle holder made for two 100ml attar bottles. add a fuzzy skin for aesthetics. printed with auto snug support.
P
Printables
Perfume Sample Holder IMPROVED
it can hold 7 samples that are ≈ 1 cm in diamater and ≈ 4.5 cm in height. This version doesn't have a double sided version saly because i had issues making it print well on the bottom side.
P
Printables
Decorative Perfume Container
Designed to keep cap on my fragrance bottle when traveling & to look pretty sitting on my nightstand!
P
Printables
Chapstick and Mini Perfume Box
It is a slip fit box that holds 9 chap stick tubes or 9 mini perfume dropper bottles! Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No **Resolution:** 0.2mm Filament Material: PLA Notes: As an Amazon…
P
Printables
Perfume sample stand - vase mode
This is a stand for perfume sample bottles. It is designed to print quickly in vase mode, using very little material, great for using up filament remnants. Being vase mode compatible it needs no supports or infill. The STLs provided are…
P
Printables
Perfume sample holder // Different sizes
I´ve been looking for a solution to not have my perfume samples lying around so they don´t leak. The available designs weren´t usable because they mostly use 1 diameter. This stepped design utilizes 16mm/14,3mm/12,3mm/11,9mm diameters for…
P
Printables
Porta decant de perfume
Minhas comprinhas saíram um pouco de controle e precisei organizar os decants na minha gaveta.
P
Printables
Adapter Rituals car perfume
Adapter for the Rituals car perfume Toyota Yaris 2001 Printed with ASA, smoothened with acetonvapors for strength.
P
Printables
NORD Perfume Gridfinity Box – 2x2 Slot Holder
Designed specifically for the sleek, refillable NORD perfume boxes from nordfragrances.com , this Gridfinity 2x2 organiser keeps your scents tidy, accessible, and looking sharp on your workbench or shelf. Whether you're mid-project or…
P
Printables
Perfume bottle decant lid / cap
The wife wanted something made to prevent little bottles of perfume decants from being accidentally spritzed. Had to use a 0.2mm nozzle to get the thinner lower walls.
P
Printables
Hanging car air freshener scent fragrance perfume
Hanging car air freshener scent fragrance perfume
P
Printables
ambi_pur perfume hook
hook and mask to hang wherever you want your odor absorbing perfume type/model ambipur / glade. Try it in the car, it works miracles! Category: Household
P
Printables
Gridfinity Perfume Holder
Would you ever think about using a gridfinity bin as a stand for any kind of cosmetics? Since today you are able to do this! Designed specially for demonstration testers with diameters 27,5x27,5x138mm, but your stuff is suit until not…
P
Printables
Pretty Perfume Organizer
Only the outer surfaces are modeled, not the inner ones. So it's important to print this with zero top layers and 0% infill . If you want to omit the dividers, then just set PrusaSlicer's slicing mode to “Close holes”.
P
Printables
Perfume Sample Holder
Tired of perfume samples rolling around? These 3D-printed holders securely store standard 1.5ml (8.8mm diameter) and 8ml (15.9mm diameter) perfume vials. Perfect for keeping your fragrance collection neat and ready to use. The minimalist…
P
Printables
Perfume Sample Holder
In perfumeries you sometimes get small samples of Eau de Toilette etc. These little bottles are usually always lying around in a drawer, so my wife asked me to build her a holder for up to 9 of these bottles. Printing with approx 15%…
P
Printables
Prada Paradoxe Perfume Stand
Display stand for Prada's Paradoxe line of perfumes, so the bottle stands up correctly. The stand incorporates a design referencing the product company name. Designed primarily for the 90ml bottle in the photos, but as long as the 30/50ml…
P
Printables
Rituals Car Perfume
You loose your orriginal Rituals perfume holder? Here's one! Just don't print with PLA, choose a high tempurature resistant filament!
P
Printables
Perfume shelf
Elegant and practical perfume shelf , perfect for displaying and organizing your fragrances. Refined design that adds both space-saving functionality and a decorative touch to your interior. Download now and organize with flair!
P
Printables
Nautica Perfume bottle Cap Lid
Lid or Cap for Nautica cologne bottle. Snap fit using PETG or ASA or PP filament. Use Arachne wall generator for slicing. Print in PETG or ASA only. 0.12mm layer height will give best finish. Can be used by scaling with other atomisers…
P
Printables
Perfume Organizer
A compact and stylish 3D-printed organizer for your perfumes. Perfect for keeping your favorite fragrances neatly arranged and easily accessible. No supports necessary 2x Strebe 2x Halterung Seite 1x Halterung Mitte 1x Bodenplatte 1x…
P
Printables
Perfume organizer
A small organizer for perfume samples. Size 146 x 148.5 mm. Contains 10 cells of 28.9 mm, 12 cells of 23 mm and 16 round cells of 17 mm diameter.
P
Printables
ESENCIERO PARA PERFUMES
Es un ESENCIERO de estilo antiguo, realizado desde la imaginación y sin modelo, perfectamente FUNCIONAL. El tapón del esenciero hace la función de dosificador El fichero ZIP contiene dos (2) archivos, un archivo STL y un archivo 3MF por…
P
Printables
Perfume and Protocol HueForge
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
P
Printables
Perfume Bottle Holder
This is a holder for a 15mm diameter perfume bottle in 100 count and an 17 mm diameter perfume bottle in 50 count. Print Settings Printer: Alfawise U30 Rafts: No Supports: No Resolution: .25mm layer height Infill: 10 Filament:…
P
Printables
Perfume & Cosmetics Organizer
Perfume & Cosmetics Organizer A stylish and practical two-tier organizer designed for holding perfume bottles, makeup items, skincare products, and other accessories. The circular layout maximises space efficiency while keeping everything…
P
Printables
Caroussel for Adopt perfume
ENGLISH : I created a carousel for Adopt perfume hosting 15 bottles. It will take 1 608ZZ bearing and 6 pads of 8 mm in diameter and more than 2mm thick. FRENCH : J'ai créé un carrousel pour parfum Adopt accueillant 15 flacons. Il faudra…
P
Printables
Bottle Capper for 3 ml Perfume Bottles
This is a simple bottle capper that applies pressure to snap the spray caps on 3 ml perfume bottles The assembly requires 3 1/4 inch diameter bolts of an appropriate length so that the parts rotate on the smooth shank of the bolt and not…
P
Printables
33ml Perfume stand
This is a design for a 33ml perfume stand. It holds six perfumes. I recommend printing with Fuzzi Skin enabled and ironing enabled. If you like the design, consider leaving a tip ;) Jest to projekt stojaka na Perfumetki 33ml, ma on…
P
Printables
Perfume sample holder
I made a version that slimed the design and shortened production time and use of materials. I used the filament (light): PLA Wood - 1.75mm - 500g - Nordic Birch, Addnorth. Dark: colorFabb PLA filament | Red bricks | 1,75mm | 0,7kg |…
P
Printables
Prefabricated stand for perfume samples
This stand consists of two parts, designed to accommodate 18 bottles up to 14mm in diameter. The size of the stand is 68x128mm. An additional layer of 0.2 mm is made on the top cover, for a beautiful smooth print on the surface of the…
P
Printables
Perfume Sample Stand
One-piece stand for perfume samples. The diameter of the bottle is up to 14mm. The stand size is 181x61mm.
P
Printables
Handheld Perfume Bottle Valve Cap Crimp Pressor Tool
Perfume Valve Cap Crimper, Manual Crimping Tool
P
Printables
Gridfinity Perfume Sample Tray
1x2 28mm tall Gridfinity tray for perfume samples. Three sizes now available as the original 11mm seems too small for some sample bottles. I didn't have any of these at the time, sorry about that. There is a test block if you would like…
P
Printables
Zippo perfume/fragrance sample case 5ml
This 3D model is a protective case for a 5 ml perfume bottle, inspired by the classic Zippo lighter shape. Its exterior mimics the clean, rectangular form of a Zippo-style lighter, making it discreet, compact, and easy to carry in a…
P
Printables
Perfume sample holders
Perfume sample holders in different sizes/shapes hexagon (holds 7 samples) octagon (holds 9 samples) I had the octagon model printed at 3D Print Pittsburgh in teal PETG at 60% infill (to give it some weight). The small holes are 11mm…
P
Printables
Perfume Samples Travel Case
I have quite a lot of small perfume samples that I like to carry with me in a protective case, so I designed this case specifically to protect them. It is suitable for common perfume samples with volumes ranging from 1–2 ml. There are two…
P
Printables
Cologne/perfume shelf for V-day
cologne/perfume shelf for displaying collections. could be used for other stuff as well, customizable as far as adding wording to it if you would like! feedback appreciated!! 2 pcs, will need glued together, i wanted it fairly big.
P
Printables
Perfume Sample Rack
The wife wants a perfume sample rack...the wife gets a perfume sample rack :), now the cost of the printer is justified. I made this modular for two or more racks. The prints take about 16 hours per section. Each section ends up using…
P
Printables
4x6 Cologne/Perfume Sample Holder
Compact 4x6 holder for storing fragrance samples. Designed to supporting most common fragrance vials. Perfect for organizing cologne, perfume, or scent samples on your desk or shelf.
P
Printables
Perfume stand
This is just a simple perfume stand, make sure to double it in size otherwise bottles won't fit.
P
Printables
perfume gift box
The model is created in Onshape. Printed with PETG 2 perimeters and 15% infill.
P
Printables
Idole perfume bottle support
This is a support for the idole perfume of 50ml makes it harder for it to tip over
P
Printables
perfume shelf display
easy to print, no support needed I printed in PLA, 0.2 layer height, 15% infill and it was good each shelf is 5X15 cm
P
Printables
Trudon Perfume Top Insert
This is a replacement for the plastic insert for the top of a Trudon perfume bottle. It friction fits into the glass top, and onto the atomizer. It might be a bit tighter than the original even, which is a welcome change. Printed in PLA+,…
P
Printables
Perfume 10ml Travel Case
I like 10ml sample perfume bottles, which can be bought from perfume collectors or are sometimes included in perfume gift sets. Since I wanted to carry them with me safely, I designed this protective case. These 10ml samples usually have…
P
Printables
Perfume, aftershave holder
Name - Height Base plate - 4 mm Wide rectangle (bottom-left corner) - 54 mm Standard rectangle (top of the base plate) - 63 mm Small rectangle (bottom-right corner) - 43 mm Total height (shape height + base plate [4 mm]) For dimensions,…
P
Printables
Perfume Samples Holder
My wife has too many perfume samples and she asked for a solution. So here it is. You can also put a perfume card into the side or put your favorite sample in the indentation. Have fun printing it and do something good for your wife or…
P
Printables
Perfume bottle stand (dodecagonal shape)
The stand in the image is printed with 10% infill and Fuzy skin: Contour At the bottom it has 4 cutouts for attaching self-adhesive silicone feet to prevent slipping.
P
Printables
Perfume Sample Box
This is a small box which holds up to four perfume sample flasks (miniature spray bottles). It is small enough to be kept in a purse and to keep those pesky little bottles from sneaking away into remote nooks and crannies of the purse.…
P
Printables
Vase Mode Cologne / Perfume Shelf
I created this shelf to neatly organize my perfume bottles and make them easier to reach for. I printed it with a 0.8mm nozzle but i'm sure a 0.4mm nozzle would work fine too. Bottom Shell Layers 0 as its not at all necessary for…