Search results: perfume

Counting matching models…

Printables

Marc Jacobs perfume travel cap

Travel cap for Marc Jacobs perfume bottle, as the original flower bottle cap tends to fall off when traveling. Print instructions Supports: None needed Infill: 15% 0,15mm Filament: PLA

Order a print of this model

Printables

Prefabricated stand for perfume samples

This stand consists of two parts, designed to accommodate 18 bottles up to 14mm in diameter. The size of the stand is 68x128mm. An additional layer of 0.2 mm is made on the top cover, for a beautiful smooth print on the surface of the…

Order a print of this model

Printables

Perfume Samples Travel Case

I have quite a lot of small perfume samples that I like to carry with me in a protective case, so I designed this case specifically to protect them. It is suitable for common perfume samples with volumes ranging from 1–2 ml. There are two…

Order a print of this model

Printables

Cologne/perfume shelf for V-day

cologne/perfume shelf for displaying collections. could be used for other stuff as well, customizable as far as adding wording to it if you would like! feedback appreciated!! 2 pcs, will need glued together, i wanted it fairly big.

Order a print of this model

Printables

4x6 Cologne/Perfume Sample Holder

Compact 4x6 holder for storing fragrance samples. Designed to supporting most common fragrance vials. Perfect for organizing cologne, perfume, or scent samples on your desk or shelf.

Order a print of this model

Printables

Perfume stand

This is just a simple perfume stand, make sure to double it in size otherwise bottles won't fit.

Order a print of this model

Printables

perfume gift box

The model is created in Onshape. Printed with PETG 2 perimeters and 15% infill.

Order a print of this model

Printables

Heart Perfume Cap

heart shaped perfume cap. added another version that might work better

Order a print of this model

Printables

Idole perfume bottle support

This is a support for the idole perfume of 50ml makes it harder for it to tip over

Order a print of this model

Printables

perfume shelf display

easy to print, no support needed I printed in PLA, 0.2 layer height, 15% infill and it was good each shelf is 5X15 cm

Order a print of this model

Printables

Trudon Perfume Top Insert

This is a replacement for the plastic insert for the top of a Trudon perfume bottle. It friction fits into the glass top, and onto the atomizer. It might be a bit tighter than the original even, which is a welcome change. Printed in PLA+,…

Order a print of this model

Printables

Perfume bottle stand (dodecagonal shape)

The stand in the image is printed with 10% infill and Fuzy skin: Contour At the bottom it has 4 cutouts for attaching self-adhesive silicone feet to prevent slipping.

Order a print of this model

Printables

10ml Perfume Sample Stand sem-modular

it may need glue if you want to go to the 2nd section.. but you can keep it with only one section, don't need anything to rotate. neither supports

Order a print of this model

Printables

Scentbird Perfume Stand

.15 layer height - variable layer height recommended No support/brim/raft required

Order a print of this model

Printables

Perfume sample stand for 14mm bottles

A few sample holders are found on here and other websites but nothing that allowed bottles with a diameter of 14mm. I decided to take inspiration from the designs but make it from scratch so I can later adjust it for different bottle…

Order a print of this model

Printables

Perfume Sample Holder for Ikea Mosslanda

It will fit all perfume tester with a diameter smaller than 11 mm. Its a left and right site to connect to each other so they'll stay together. Printed with PLA in 0.2mm LH. 15% Gyroid infill

Order a print of this model

Printables

perfume bottle

Its a rough copy of a chanel perfume bottle i thought looked nice. Its got threads and working screwcap.

Order a print of this model

Printables

Perfume Stand - 3 Tiers

Large display stand with 3 tiers. Printed in bronze Bambu PLA which make this look very elegant. Printed in 2 pieces since this is roughly 15"x10". I optimized the printing so it is still structurally sound and only requires about ~300g…

Order a print of this model

Printables

Perfume sample stopper

Small part to stop perfume samples from being compressed in your bag.

Order a print of this model

Printables

Airwick MyPerfume

I bought the house-perfume from “MyPerfume”. And i thought it would be nice to have it spray automatic. So i took my Airwick automatic sprayer, and made an adapter to use the large spraycan. Needed another nozzle so it would work. This is…

Order a print of this model

Printables

Armani Code Homme perfume organizer

Easy and fast printing design. Perfume bottles should fit in perfectly. Additionally made two holes for small perfume testers (diameter: 10mm). Printed with PLA.

Order a print of this model

Printables

Fancy Box for makeup, Jewelry, perfume.

Uses 6x3mm magnets glued in for door latching, found here: https://www.amazon.co.uk/gp/product/B07MT9P2K9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and hinges with M2x10mm screws, found here:…

Order a print of this model

Printables

Gridfinity Cologne or Perfume Sample Size Spray Tube Holder (1x1)

Holds 5 sample-size cologne or perfume tubes in a 1x1 gridfinity square. Included standard fit, loose, and tight that may be useful depending on your printer calibration and whether the tubes have labels or not. Shoutout to KptnAutismus…

Order a print of this model

Printables

Organizer of 5 small perfumes

The size of the containers is 2U x 2U (84 x 84 mm). Each hole is 23 x 23 mm.

Order a print of this model

Printables

Mid-sized perfume organizer

The size of the hole is 30 x 25 mm. It allows two perfumes to be contained.

Order a print of this model

Printables

Customized Chanel perfume organizer

It is specifically customized for Chanel perfume. The total size is 1U x 2U (42 x 84 mm).

Order a print of this model

Printables

Minimalist Perfume Samples Holder

Intro A minimalist holder for 20 perfume samples: 10x1.5ml and 10x2.0ml. Features a clean, Scandinavian-inspired design that keeps your fragrance collection neatly organized and easily accessible on a dresser, in a drawer or bathroom…

Order a print of this model

Printables

Bath & Body Works perfume cap replacement

Someone smashed the damn lid of my girlfriend's Bath & Body Works perfume cap but I have a device that makes plastic things so I made a plastic thing and it looks good thanks. Prints quick, half an hour or so. Use whatever filament and…

Order a print of this model

Printables

Perfume lock

Lock for perfume so it won't spray when it is in your bag.

Order a print of this model

Printables

Sample perfume display

This was a request from a friend who collected sample perfume vials.

Order a print of this model

Printables

Marc Jacobs perfume travel cap

Travel cap for Marc Jacobs perfume bottle, as the original flower bottle cap tends to fall off when traveling. Print instructions Supports: None needed Infill: 15% 0,15mm Filament: PLA

Order a print of this model

Printables

Cologne / Perfume 1 ML Sample Holder

Designed to hold 1 ml samples with a hole size of 0.38 inches in diameter and a depth of 3/16 inches. Dimensions are 3 inches by 4 inches by 0.25 inches.

Order a print of this model

Printables

Perfume Tester Tube Travel Case

3D-Printed Travel Case for Perfume Testers This compact, two-part travel case is perfect for carrying perfume testers (55mm x 10mm) on short trips, eliminating the need to pack large, bulky perfume bottles. The case is designed with…

Order a print of this model

Printables

Perfume Sample Holder

It can hold up to 12 perfume samples that are ≈ 1 cm in diamater and ≈ 4.5 cm in height. I also made a halved version that can hold up to 6 if the normal versions too big.

Order a print of this model

Printables

Perfume sample holder

Simple but functional holder for perfume samples. Onshape if you want to modify: onshape . Print instructions Category: Containers Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10%

Order a print of this model

Printables

Perfume sample holder

The 3D project is a stand for perfume samples, designed to hold 50 samples in openings with a diameter of 12,5 mm or 32 samples of 15mm. It includes a dedicated space for a note to describe the collection or add information. The simple…

Order a print of this model

Printables

Perfume / cologne holder for closets .

Its really easy to print but u have to bare in mind that you only need supports for the bottom and infill above 15% . Keep the speeds and temps low for better results .I used fuzzy skin for this but you can save time with it off . PLA…

Order a print of this model

Printables

Honeycomb organizer for perfumes

Individual honeycombs can be connected with glue and attached to the wall with double-sided tape .

Order a print of this model

Printables

Perfume Spray Bottle Stand Organizer

Print with supports for best results

Order a print of this model

Printables

Arabic Attar bottle holder (perfume)

This is an attar bottle holder made for two 100ml attar bottles. add a fuzzy skin for aesthetics. printed with auto snug support.

Order a print of this model

Printables

Perfume Sample Holder IMPROVED

it can hold 7 samples that are ≈ 1 cm in diamater and ≈ 4.5 cm in height. This version doesn't have a double sided version saly because i had issues making it print well on the bottom side.

Order a print of this model

Printables

Decorative Perfume Container

Designed to keep cap on my fragrance bottle when traveling & to look pretty sitting on my nightstand!

Order a print of this model

Printables

Chapstick and Mini Perfume Box

It is a slip fit box that holds 9 chap stick tubes or 9 mini perfume dropper bottles! Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No **Resolution:** 0.2mm Filament Material: PLA Notes: As an Amazon…

Order a print of this model

Printables

Perfume sample stand - vase mode

This is a stand for perfume sample bottles. It is designed to print quickly in vase mode, using very little material, great for using up filament remnants. Being vase mode compatible it needs no supports or infill. The STLs provided are…

Order a print of this model

Printables

Perfume sample holder // Different sizes

I´ve been looking for a solution to not have my perfume samples lying around so they don´t leak. The available designs weren´t usable because they mostly use 1 diameter. This stepped design utilizes 16mm/14,3mm/12,3mm/11,9mm diameters for…

Order a print of this model

Printables

Porta decant de perfume

Minhas comprinhas saíram um pouco de controle e precisei organizar os decants na minha gaveta.

Order a print of this model

Printables

Adapter Rituals car perfume

Adapter for the Rituals car perfume Toyota Yaris 2001 Printed with ASA, smoothened with acetonvapors for strength.

Order a print of this model

Printables

NORD Perfume Gridfinity Box – 2x2 Slot Holder

Designed specifically for the sleek, refillable NORD perfume boxes from nordfragrances.com , this Gridfinity 2x2 organiser keeps your scents tidy, accessible, and looking sharp on your workbench or shelf. Whether you're mid-project or…

Order a print of this model

Printables

Perfume bottle decant lid / cap

The wife wanted something made to prevent little bottles of perfume decants from being accidentally spritzed. Had to use a 0.2mm nozzle to get the thinner lower walls.

Order a print of this model

Printables

Hanging Perfume Vial

Hanging Perfume Vile. Add your own chain.

Order a print of this model

Printables

Hanging car air freshener scent fragrance perfume

Order a print of this model

Printables

ambi_pur perfume hook

hook and mask to hang wherever you want your odor absorbing perfume type/model ambipur / glade. Try it in the car, it works miracles! Category: Household

Order a print of this model

Printables

Perfume Sample Holder

Simple holder for common perfume samples.

Order a print of this model

Printables

Gridfinity Perfume Holder

Would you ever think about using a gridfinity bin as a stand for any kind of cosmetics? Since today you are able to do this! Designed specially for demonstration testers with diameters 27,5x27,5x138mm, but your stuff is suit until not…

Order a print of this model

Printables

Pretty Perfume Organizer

Only the outer surfaces are modeled, not the inner ones. So it's important to print this with zero top layers and 0% infill . If you want to omit the dividers, then just set PrusaSlicer's slicing mode to “Close holes”.

Order a print of this model

Printables

Perfume Sample Holder

Tired of perfume samples rolling around? These 3D-printed holders securely store standard 1.5ml (8.8mm diameter) and 8ml (15.9mm diameter) perfume vials. Perfect for keeping your fragrance collection neat and ready to use. The minimalist…

Order a print of this model

Printables

Perfume Sample Holder

In perfumeries you sometimes get small samples of Eau de Toilette etc. These little bottles are usually always lying around in a drawer, so my wife asked me to build her a holder for up to 9 of these bottles. Printing with approx 15%…

Order a print of this model

Printables

Perfume Holder

Easy perfume holder for flakons with 9mm diameter.

Order a print of this model

Printables

Prada Paradoxe Perfume Stand

Display stand for Prada's Paradoxe line of perfumes, so the bottle stands up correctly. The stand incorporates a design referencing the product company name. Designed primarily for the 90ml bottle in the photos, but as long as the 30/50ml…

Order a print of this model

Printables

Rituals Car Perfume

You loose your orriginal Rituals perfume holder? Here's one! Just don't print with PLA, choose a high tempurature resistant filament!

Order a print of this model

Printables

Perfume shelf

Elegant and practical perfume shelf , perfect for displaying and organizing your fragrances. Refined design that adds both space-saving functionality and a decorative touch to your interior. Download now and organize with flair!

Order a print of this model

Printables

shelf for perfume

wall shelf for 33ml perfume or other

Order a print of this model

Printables

Nautica Perfume bottle Cap Lid

Lid or Cap for Nautica cologne bottle. Snap fit using PETG or ASA or PP filament. Use Arachne wall generator for slicing. Print in PETG or ASA only. 0.12mm layer height will give best finish. Can be used by scaling with other atomisers…

Order a print of this model

Printables

Perfume Sample Holder & Organiser

Holds 5 perfume samples (1, 1.2, 2 ml).

Order a print of this model

Printables

Perfume Organizer

A compact and stylish 3D-printed organizer for your perfumes. Perfect for keeping your favorite fragrances neatly arranged and easily accessible. No supports necessary 2x Strebe 2x Halterung Seite 1x Halterung Mitte 1x Bodenplatte 1x…

Order a print of this model

Printables

Perfume organizer

A small organizer for perfume samples. Size 146 x 148.5 mm. Contains 10 cells of 28.9 mm, 12 cells of 23 mm and 16 round cells of 17 mm diameter.

Order a print of this model

Printables

ESENCIERO PARA PERFUMES

Es un ESENCIERO de estilo antiguo, realizado desde la imaginación y sin modelo, perfectamente FUNCIONAL. El tapón del esenciero hace la función de dosificador El fichero ZIP contiene dos (2) archivos, un archivo STL y un archivo 3MF por…

Order a print of this model

Printables

Perfume and Protocol HueForge

Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…

Order a print of this model

Printables

Perfume Bottle Holder

This is a holder for a 15mm diameter perfume bottle in 100 count and an 17 mm diameter perfume bottle in 50 count. Print Settings Printer: Alfawise U30 Rafts: No Supports: No Resolution: .25mm layer height Infill: 10 Filament:…

Order a print of this model

Printables

Perfume shelf

Shelf for perfumes that fits onto Prusa Mk4 bed.

Order a print of this model

Printables

Perfume & Cosmetics Organizer

Perfume & Cosmetics Organizer A stylish and practical two-tier organizer designed for holding perfume bottles, makeup items, skincare products, and other accessories. The circular layout maximises space efficiency while keeping everything…

Order a print of this model

Printables

protective cover for 'Adopt' perfume

protective cover for 'Adopt' perfume, 0.2 per layer

Order a print of this model

Printables

Caroussel for Adopt perfume

ENGLISH : I created a carousel for Adopt perfume hosting 15 bottles. It will take 1 608ZZ bearing and 6 pads of 8 mm in diameter and more than 2mm thick. FRENCH : J'ai créé un carrousel pour parfum Adopt accueillant 15 flacons. Il faudra…

Order a print of this model

Printables

Bottle Capper for 3 ml Perfume Bottles

This is a simple bottle capper that applies pressure to snap the spray caps on 3 ml perfume bottles The assembly requires 3 1/4 inch diameter bolts of an appropriate length so that the parts rotate on the smooth shank of the bolt and not…

Order a print of this model

Printables

33ml Perfume stand

This is a design for a 33ml perfume stand. It holds six perfumes. I recommend printing with Fuzzi Skin enabled and ironing enabled. If you like the design, consider leaving a tip ;) Jest to projekt stojaka na Perfumetki 33ml, ma on…

Order a print of this model

Printables

Perfume sample holder

I made a version that slimed the design and shortened production time and use of materials. I used the filament (light): PLA Wood - 1.75mm - 500g - Nordic Birch, Addnorth. Dark: colorFabb PLA filament | Red bricks | 1,75mm | 0,7kg |…

Order a print of this model

Printables

Prefabricated stand for perfume samples

Order a print of this model

Printables

Perfume Sample Stand

One-piece stand for perfume samples. The diameter of the bottle is up to 14mm. The stand size is 181x61mm.

Order a print of this model

Printables

Handheld Perfume Bottle Valve Cap Crimp Pressor Tool

Perfume Valve Cap Crimper, Manual Crimping Tool

Order a print of this model

Printables

Gridfinity Perfume Sample Tray

1x2 28mm tall Gridfinity tray for perfume samples. Three sizes now available as the original 11mm seems too small for some sample bottles. I didn't have any of these at the time, sorry about that. There is a test block if you would like…

Order a print of this model

Printables

Zippo perfume/fragrance sample case 5ml

This 3D model is a protective case for a 5 ml perfume bottle, inspired by the classic Zippo lighter shape. Its exterior mimics the clean, rectangular form of a Zippo-style lighter, making it discreet, compact, and easy to carry in a…

Order a print of this model

Printables

Perfume sample holders

Perfume sample holders in different sizes/shapes hexagon (holds 7 samples) octagon (holds 9 samples) I had the octagon model printed at 3D Print Pittsburgh in teal PETG at 60% infill (to give it some weight). The small holes are 11mm…

Order a print of this model

Printables

perfume cap

simple cap for a perfume bottle

Order a print of this model

Printables

Perfume Samples Travel Case

Order a print of this model

Printables

Cologne/perfume shelf for V-day

Order a print of this model

Printables

Perfume Sample Rack

The wife wants a perfume sample rack...the wife gets a perfume sample rack :), now the cost of the printer is justified. I made this modular for two or more racks. The prints take about 16 hours per section. Each section ends up using…

Order a print of this model

Printables

4x6 Cologne/Perfume Sample Holder

Compact 4x6 holder for storing fragrance samples. Designed to supporting most common fragrance vials. Perfect for organizing cologne, perfume, or scent samples on your desk or shelf.

Order a print of this model

Printables

Perfume stand

This is just a simple perfume stand, make sure to double it in size otherwise bottles won't fit.

Order a print of this model

Printables

perfume gift box

The model is created in Onshape. Printed with PETG 2 perimeters and 15% infill.

Order a print of this model

Printables

Heart Perfume Cap

heart shaped perfume cap. added another version that might work better

Order a print of this model

Printables

Idole perfume bottle support

This is a support for the idole perfume of 50ml makes it harder for it to tip over

Order a print of this model

Printables

perfume shelf display

easy to print, no support needed I printed in PLA, 0.2 layer height, 15% infill and it was good each shelf is 5X15 cm

Order a print of this model

Printables

Trudon Perfume Top Insert

Order a print of this model

Printables

Perfume 10ml Travel Case

I like 10ml sample perfume bottles, which can be bought from perfume collectors or are sometimes included in perfume gift sets. Since I wanted to carry them with me safely, I designed this protective case. These 10ml samples usually have…

Order a print of this model

Printables

Heart Perfume Lid

This is a heart shaped perfume lid

Order a print of this model

Printables

Perfume, aftershave holder

Name - Height Base plate - 4 mm Wide rectangle (bottom-left corner) - 54 mm Standard rectangle (top of the base plate) - 63 mm Small rectangle (bottom-right corner) - 43 mm Total height (shape height + base plate [4 mm]) For dimensions,…

Order a print of this model

Printables

Perfume Samples Holder

My wife has too many perfume samples and she asked for a solution. So here it is. You can also put a perfume card into the side or put your favorite sample in the indentation. Have fun printing it and do something good for your wife or…

Order a print of this model

Printables

Perfume bottle stand (dodecagonal shape)

The stand in the image is printed with 10% infill and Fuzy skin: Contour At the bottom it has 4 cutouts for attaching self-adhesive silicone feet to prevent slipping.

Order a print of this model

Printables

Perfume Sample Box

This is a small box which holds up to four perfume sample flasks (miniature spray bottles). It is small enough to be kept in a purse and to keep those pesky little bottles from sneaking away into remote nooks and crannies of the purse.…

Order a print of this model

Printables

Vase Mode Cologne / Perfume Shelf

I created this shelf to neatly organize my perfume bottles and make them easier to reach for. I printed it with a 0.8mm nozzle but i'm sure a 0.4mm nozzle would work fine too. Bottom Shell Layers 0 as its not at all necessary for…

Order a print of this model