Anet A8 - Extruder Fan Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to easily remove the fan while changing filament. The fan is just pushed into the bracket.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Designed to easily remove the fan while changing filament.
The fan is just pushed into the bracket.
This mod gets rid off the heatsink which might be a problem, but I never experienced any issues.Use at your own risk.
After making this thing I found out, that I was not the first one with this idea of mounting the fan:
Anet A8, easy removable extruder cooling fan
by85holmberg https://www.thingiverse.com/thing:2326111
You should probably use ABS or a other material with a good heat resistance.
But PLA should also be fine.
Post-Printing
I used some M3 nuts to secure the motor and the mounting.
Category: 3D Printer Parts