1 / 4
Filament Quick Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament quick clamp to prevent spool from unraveling. Easy to use, easy to print.
- Ocena
- 4,758 / 5
- Polubienia
- 660
- Pobrania
- 1460
- Wydruki
- 43
- Wyświetlenia
- 12 606
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 43) (Komentarze: 71)Remiksy (6)Kolekcje (876)Powiązane
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored.
- Mechanism is fully print-in-place.
- Add rubber band for the spring loading. I reused some that came with a bunch of asparagus.
- There is a version with filament clip and a classic one without clip. I recommend the version with filament clip.
- If you go clip-less, insert filament between rubber band and clamp for extra security. This is if your filament want to escape under the clamp.
- STLs with different sizes available:
- XS: 39 - 52 mm
- S: 51 - 64 mm
- M: 55 - 68 mm (this size works fine on my Prusament and eSUN 1 kg spools)
- L: 64 - 77 mm
- XL: 73 - 86 mm
Printing tips:
- Don't use brim as it might fuse the first layer.
- Don't use supports, the model relies on bridging and safe overhangs.
- Use at least 3 perimeters so that the bridging has something to attach to.
- Give it a squeeze to free mechanism in case it is stuck after printing. It should release with a click, pull it back and forth a few times and it should move freely.
- PLA can be slippery. Apply some duct tape to the clamp ends if more friction is needed.
Also have a look at my alternative model called Grippy Filament Clip Clamp: https://www.printables.com/model/573375-grippy-filament-clip-clamp