1 / 4
Filament Quick Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament quick clamp to prevent spool from unraveling. Easy to use, easy to print.
- Rating
- 4.758 / 5
- Likes
- 660
- Downloads
- 1,460
- Makes
- 43
- Views
- 12,606
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored.
- Mechanism is fully print-in-place.
- Add rubber band for the spring loading. I reused some that came with a bunch of asparagus.
- There is a version with filament clip and a classic one without clip. I recommend the version with filament clip.
- If you go clip-less, insert filament between rubber band and clamp for extra security. This is if your filament want to escape under the clamp.
- STLs with different sizes available:
- XS: 39 - 52 mm
- S: 51 - 64 mm
- M: 55 - 68 mm (this size works fine on my Prusament and eSUN 1 kg spools)
- L: 64 - 77 mm
- XL: 73 - 86 mm
Printing tips:
- Don't use brim as it might fuse the first layer.
- Don't use supports, the model relies on bridging and safe overhangs.
- Use at least 3 perimeters so that the bridging has something to attach to.
- Give it a squeeze to free mechanism in case it is stuck after printing. It should release with a click, pull it back and forth a few times and it should move freely.
- PLA can be slippery. Apply some duct tape to the clamp ends if more friction is needed.
Also have a look at my alternative model called Grippy Filament Clip Clamp: https://www.printables.com/model/573375-grippy-filament-clip-clamp