1 / 8
Klipper Screen with Raspberry Pi 4B and OSOYOO 5 inch DSI screen — zdjęcie 1
1 / 8

Klipper Screen with Raspberry Pi 4B and OSOYOO 5 inch DSI screen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed my own case for Klipper / Klipperscreen with the following components: Raspberry Pi 4B OSOYOO 5" DSI…

Ocena
0 / 5
Polubienia
47
Pobrania
568
Wydruki
1
Wyświetlenia
3447
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I designed my own case for Klipper / Klipperscreen with the following components:

  • Raspberry Pi 4B
  • OSOYOO 5" DSI touchscreen
  • Geekpi Raspberry PI Aluminum Heatsink
  • 4x M3 16mm flat head screws
  • 2x M3 16-12mm button head screws
  • 2x M2.5 screws (I forget what length)
  • 6x M3 brass inserts (optional)

There's 2 versions of the bottom and top bezel. The files labeled insert have larger holes for the inserts. The 2 other files have smaller holes that can be self tapped with the M3 screws.

The 2x M2.5 screws are to mount heatsink to the LCD standoffs, the screws provided were too short.

Should work for Octoprint + whatever touchscreen plugins, as it's just software. But I didn't test it on this OSOYOO screen.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 S1

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15

Filament: Sunlu PLA Silver


Notes:

Only the stand needs supports. Print with a brim if you notice warping/lifting, but you'll have to cleanup the fillet edges afterwarrds.

Category: 3D Printer Accessories

Tagi