Klipper Screen with Raspberry Pi 4B and OSOYOO 5 inch DSI screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed my own case for Klipper / Klipperscreen with the following components: Raspberry Pi 4B OSOYOO 5" DSI…
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 568
- Makes
- 1
- Views
- 3,447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I designed my own case for Klipper / Klipperscreen with the following components:
- Raspberry Pi 4B
- OSOYOO 5" DSI touchscreen
- Geekpi Raspberry PI Aluminum Heatsink
- 4x M3 16mm flat head screws
- 2x M3 16-12mm button head screws
- 2x M2.5 screws (I forget what length)
- 6x M3 brass inserts (optional)
There's 2 versions of the bottom and top bezel. The files labeled insert have larger holes for the inserts. The 2 other files have smaller holes that can be self tapped with the M3 screws.
The 2x M2.5 screws are to mount heatsink to the LCD standoffs, the screws provided were too short.
Should work for Octoprint + whatever touchscreen plugins, as it's just software. But I didn't test it on this OSOYOO screen.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament: Sunlu PLA Silver
Notes:
Only the stand needs supports. Print with a brim if you notice warping/lifting, but you'll have to cleanup the fillet edges afterwarrds.
Category: 3D Printer Accessories