FlyFishRC M10 Mini GPS Reference Model and Reference GPS Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reference FlyFishRC M10 Mini GPS model and GPS holder that can be used as a base to easily create custom GPS mounts.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 303
- Wydruki
- 0
- Wyświetlenia
- 1212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some time ago I got one of these mini GPS units to put on my quad after I lost the previous GPS unit in a crash. Turns out this unit is quite decent and, comparatively, pretty cheap so I'm quite happy with it.
One problematic thing was that I could not find a 3D printable mount for it so I decided to take a stab at making my own. Towards achieving this goal I took measurements and created a 3D reference model of the GPS unit and a basic GPS holder using this reference model.
You may find that the holder has a bit of a tight fit however this was done by design to make sure that the GPS unit won't eject from the holder no matter how severe a potential crash is.
The idea of the holder itself isn't to print and use as is but instead to serve as a modular “drop-in” that can be attached to custom geometry specifically tailored for your particular frame. See for example the following remix that I made for the iFlight Nazgul Evoque frame:
I'm releasing these two models to make it easier to for anyone that may want to create a custom GPS mount for this particular GPS unit.