1 / 6
Solder Reel Holder MKI — zdjęcie 1
1 / 6

Solder Reel Holder MKI

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another solder reel holder! This is my original design I've used for several months now.

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
346
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Yet another solder reel holder!

This one is what I use at work as an Electro-Mech assembler.

What I found so frustrating was that just having a solder reel on its own meant pulling the wire vertically from the reel resulting in a rather messy coil of solder wire which then had to be straightened before applying the solder to the joint - a lot of time wasted if you do the time & motion calcs.

Cue this holder, which keeps the solder both tidy (no messy coils lying around) and straight, as its pulled from the holder - and thus ready to feed into the joint. It also avoids the wire getting tangled under the reel and you can move the reel around without having to touch/ handle the solder itself too much with your fingers - healthier if you still use leaded solder!

There is a circular ridge around the base of the spindle which reduces friction, thus easing rotation.

There is a cavity in the base which can house a metal disc, (76mmx8mm) to lower the holder's centre of gravity and avoid being dragged (use 'bumpons' etc.), or toppled over.

Alternatively, one can use waste solder deposits and with the underplate being glued into place, sealed closed.

The hole in the side of the 'tiara' piece is to guide the wire away from the bottom of the solder reel and also keep it straight, while feeding it into the joint being soldered - a rather simple but nonetheless elegant method in keeping things tidy.

When finished soldering, any length of unused solder wire can be retracted back onto the reel by merely rotating it in reverse.

UPDATE: New spindle .stl and gcode files uploaded, for anyone who has difficulty in matching a standard reel 20mm dia inner hole with the original spindle - the updated version now has a 19mm core.

 

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

0.2mm

Infill: 

20%

Filament: Generic PLA or PETG Colour to suit


 

Notes:

 

Depending on the hole size in the solder reel, which is usually 20mm, there may need to be some adaptation/ adjustment with a little widening of the hole as the spindle's diameter is about 19.5mm or so.

Although PLA works just as well, PETG is what I prefer to use in a more industrial environment as it is more resilient and durable in such circumstances.

If filament is used which has been exposed to humidity for a while, e.g. being open to the air & not kept enclosed/ sealed in a bag, then you may need to use a file to clear away any 'hairs' of filament which could present themselves! (PETG can sometimes be just as bad.)

Post-Printing

Assembly

The cavity in the base is designed to house a round, plasma-cut 75-76mm x 8mm metal disc such as sold on eBay: https://www.ebay.co.uk/itm/225544186730 and which does the job perfectly in loweing the holder's center of gravity.

After removing any filament 'hairs', it can be assembled with the spindle inserted into the body first, the metal disc inserted from underneath and the underplate then glued in place with a thin bead of CA glue on the flat area around the inside edge.

Alternatively, the underplate can be attached first by gluing in place around the wider inside edge of the cavity, the disc or weight then added/ pressed into place and after that the spindle section slid firmly into place on top of the cavity (making sure it is level to the base!), securing it with a thin bead of CA glue around the inner edge/ bottom corner of the outer wall to seal it.

The tiara is meant to rotate freely around the spindle to enable ease of use when the holder is kept static.

 

 

 

Category: Hand Tools

Tagi